OUR PRODUCTS
>
>
>
DL-BM SERIES SUBMERSIBLE ELECTRIC 3 INCH PUMP

Products

DL-BM SERIES SUBMERSIBLE ELECTRIC 3 INCH PUMP

DL-BM SERIES SUBMERSIBLE ELECTRIC 3 INCH PUMP
 ${ele.title}
SPECIFICATIONS
Parameters
TECHNICAL DATA
CATALOGUE

SPECIFICATIONS:

The DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP delivers up to 4Z2 m3/h at 2850 rpm.The head of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP can reach 140 m at 2850 rpm.DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP The maximum overall pump diameter (including cable cover) is 80 mm.The maximum allowable sand volume of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP is 150 g/m3.The delivery port of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP is Rpl"", Rpl"" 1/4.


MOTOR:

• 3OS single-phase version: from 0,25 to 1,5 kW; 220 V 50 Hz.
• Horizontal operation: 3OS up to 1,5 kW.
• Maximum temperature of water in contact with motor: 35℃ .


CONSTRUCTION & CHARACTERISTICS:

The cost-effective construction of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP ensures low cost, high efficiency, better performance and reliability.The DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP has a wear-resistant construction, and the floating impeller ensures optimum wear resistance.The hexagonal pump shaft of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP ensures efficient impeller drive.The DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP is equipped with a check valve at the outlet to prevent water backflow and reduce water hammer on the pump, protecting the impeller and diffuser.DL-BM series pumps can be coupled with 3OS motors.The DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP supports both vertical and horizontal installation.Standard and special versions of the DL-BM SERIES SUBMERSIBLE ELECTRIC 3 inch PUMP are available.


We could not find any corresponding parameters, please add them to the properties table

 

 

NEW JET S.R.L.

Via della Tecnica n.5-42015 Prato di Correggio(RE) ITALY

+39 0522 736526

GUESTBOOK

Username used for comment:
客户留言
Description:
验证码