NEW JET
NEWS
>
>
>
china OIL-FILLED MOTOR products Precautions for refueling

News

china OIL-FILLED MOTOR products Precautions for refueling

  • Origin:
  • Time of issue:2022-09-21 14:26
  • Views:

(Summary description)1.China OIL-FILLED MOTOR products Two-pole motors with oil filling holes should be filled with oil every 2 months. 2. The four-pole motor with oil filling hole should be filled with oil once every three months. The oil filling hole at the rear of the motor should be extended with an extension rod to lead the oil filling point to the outside of the fan cover. 3. The six-pole motor with oil filling hole should be oiled every six months

china OIL-FILLED MOTOR products Precautions for refueling

(Summary description)1.China OIL-FILLED MOTOR products Two-pole motors with oil filling holes should be filled with oil every 2 months. 2. The four-pole motor with oil filling hole should be filled with oil once every three months. The oil filling hole at the rear of the motor should be extended with an extension rod to lead the oil filling point to the outside of the fan cover. 3. The six-pole motor with oil filling hole should be oiled every six months

  • Categories:OIL-FILLED MOTOR
  • Author:
  • Origin:
  • Time of issue:2022-09-21 14:26
  • Views:
Information

  china OIL-FILLED MOTOR products Lubrication Cycle

OIL-FILLED MOTOR

  1.China OIL-FILLED MOTOR products Two-pole motors with oil filling holes should be filled with oil every 2 months. 2. The four-pole motor with oil filling hole should be filled with oil once every three months. The oil filling hole at the rear of the motor should be extended with an extension rod to lead the oil filling point to the outside of the fan cover. 3. The six-pole motor with oil filling hole should be oiled every six months

  4. Eight-pole and above china OIL-FILLED MOTOR products can be handled flexibly according to the situation, but the maximum time of the low-voltage motor shall not exceed 1 year. 5. For the sealed lubrication motor without oiling nozzle, alkaline lubrication maintenance is generally arranged according to the maintenance time and operating conditions, and the general requirement is not more than 6 months. 6. When there are abnormal conditions such as high temperature and abnormal noise during the lubrication cycle, the management should be upgraded, and the oil should be refueled or maintained at the right time.

  china OIL-FILLED MOTOR products Lubrication steps:

  1. Open the dust cover of the oil filling nozzle and the oil discharge port, make sure that the oil filling nozzle is clean and free of debris, use a manual oil gun or a pneumatic oil gun to connect to the oil filling nozzle and inject grease until new grease is discharged from the oil discharge port.

  2. Remove the oil gun, let china OIL-FILLED MOTOR products run for 10~20 minutes, confirm that the excess oil has been discharged, cover the oil filling nozzle and oil discharge port with dust caps, and finish oiling.

Keyword:

NEW JET S.R.L.

Via della Tecnica n.5-42015 Prato di Correggio(RE) ITALY

+39 0522 736526

GUESTBOOK

Username used for comment:
客户留言
Description:
验证码

Copyright © 2021 NEW JET All Right Reserved.

 

辽ICP备18014221号-4