NEW JET
NEWS
>
>
>
SUBMERSIBLE 8 INCH PUMP factory extends submersible pump life problem

News

SUBMERSIBLE 8 INCH PUMP factory extends submersible pump life problem

  • Origin:
  • Time of issue:2022-08-26 08:11
  • Views:

(Summary description)SUBMERSIBLE 8 INCH PUMP factory confirms correct motor rotation direction.The rotation direction of the motor should be clarified. Now there are many types of submersible pumps that can discharge water in both forward and reverse rotations, but the water output is small and the current is large during reverse rotation, and the motor winding will be damaged if the reverse rotation time is too long.

SUBMERSIBLE 8 INCH PUMP factory extends submersible pump life problem

(Summary description)SUBMERSIBLE 8 INCH PUMP factory confirms correct motor rotation direction.The rotation direction of the motor should be clarified. Now there are many types of submersible pumps that can discharge water in both forward and reverse rotations, but the water output is small and the current is large during reverse rotation, and the motor winding will be damaged if the reverse rotation time is too long.

Information

  SUBMERSIBLE 8 INCH PUMP factory confirms correct motor rotation direction

  The rotation direction of the motor should be clarified. Now there are many types of submersible pumps that can discharge water in both forward and reverse rotations, but the water output is small and the current is large during reverse rotation, and the motor winding will be damaged if the reverse rotation time is too long.

SUBMERSIBLE 8 INCH PUMP

  SUBMERSIBLE 8 INCH PUMP factory prohibits abnormal power supply voltage from starting

  Because the low-voltage power supply line is relatively long, it is common for the voltage at the end of the line to be too low.

  Insulation resistance requirements for cable installation of SUBMERSIBLE 8 INCH PUMP factory and submersible electric pump

  When installing the submersible pump, the cable should be overhead, and the power cable should not be too long. Do not apply force to the cable when the submersible pump is launched or lifted, so as not to cause the power cord to break.

  Installation of earth leakage protector in SUBMERSIBLE 8 INCH PUMP plant

  The leakage protector is also called a life saver, and its function can be understood from the three words "life saver". Because the submersible pump works underwater, it is easy to leak electricity, resulting in power loss and even electric shock accidents.

  SUBMERSIBLE 8 INCH PUMP factory recommends avoiding frequent switching

  Do not switch on and off the submersible pump frequently, this is because backflow will occur when the electric pump stops, and if it is turned on immediately, the motor load will start, resulting in excessive starting current and burning out the windings.

Keyword:

NEW JET S.R.L.

Via della Tecnica n.5-42015 Prato di Correggio(RE) ITALY

+39 0522 736526

GUESTBOOK

Username used for comment:
客户留言
Description:
验证码

Copyright © 2021 NEW JET All Right Reserved.