News
Custom 4inch submersible pump needs to be checked and prepared
- Origin:
- Time of issue:2022-07-08 08:02
- Views:
(Summary description)It is very important to choose a customized 4inch submersible pump before use. The model of the pump should be selected according to the actual situation of the water source and the requirements of working time and pump water volume. First of all, the lift should be larger than the drop between the water intake and the water outlet; secondly, the flow rate of the pump should be able to meet the requirements of drainage and irrigation.
Custom 4inch submersible pump needs to be checked and prepared
(Summary description)It is very important to choose a customized 4inch submersible pump before use. The model of the pump should be selected according to the actual situation of the water source and the requirements of working time and pump water volume. First of all, the lift should be larger than the drop between the water intake and the water outlet; secondly, the flow rate of the pump should be able to meet the requirements of drainage and irrigation.
- Categories:4inch submersible pump
- Author:
- Origin:
- Time of issue:2022-07-08 08:02
- Views:
It is very important to choose a customized 4inch submersible pump before use. The model of the pump should be selected according to the actual situation of the water source and the requirements of working time and pump water volume. First of all, the lift should be larger than the drop between the water intake and the water outlet; secondly, the flow rate of the pump should be able to meet the requirements of drainage and irrigation.
Customized 4inch submersible pump is an important equipment for deep well water pumping. When in use, the whole unit dives into the water to work, extracting groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, seawater lifting, ship load regulation, and can also be used for fountain landscapes.
Inspection and preparation of customized deep well 4 inch submersible pump before going down
1. The customized 4inch submersible pump should be equipped with lifting equipment capable of lifting a height of more than 3 meters and bearing the entire weight of the unit, as well as tripods, clamps, wrenches, screwdrivers, wire pliers, 500V megohmmeter, insulating rubber automatic Adhesive tape and other installation equipment.
2. Check whether the installation size of the motor is in line with the installation size of the water pump, and whether the power of the motor is appropriate.
3. Customize the 4inch submersible pump to check whether the voltage and frequency of the power supply are consistent with the motor nameplate, and whether the parameters of the control cabinet used match the motor.
4. Customize the 4inch submersible pump to check whether the power cable is damaged and whether its specification is reasonable. The cable is submerged into the water for 6 hours, and the insulation resistance to ground measured with a 500V insulation resistance meter should not be less than 500 megohms.
GUESTBOOK