News
4 What precautions should be taken when using INCH SUBMERSIBLE ELECTRIC WATER PUMP products
- Origin:
- Time of issue:2022-12-09 17:36
- Views:
(Summary description)4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products have been widely used, but do you know? If used improperly, it is easy to be dangerous. Today, 4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products factory will tell you about the precautions when using submersible pumps.
4 What precautions should be taken when using INCH SUBMERSIBLE ELECTRIC WATER PUMP products
(Summary description)4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products have been widely used, but do you know? If used improperly, it is easy to be dangerous. Today, 4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products factory will tell you about the precautions when using submersible pumps.
- Categories:4 INCH SUBMERSIBLE ELECTRIC WATER PUMP
- Author:
- Origin:
- Time of issue:2022-12-09 17:36
- Views:
4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products have been widely used, but do you know? If used improperly, it is easy to be dangerous. Today, 4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products factory will tell you about the precautions when using submersible pumps.
4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products Adopting protective earthing is a requirement of national mandatory standards. Only by adopting protective grounding can the personal safety during use be ensured.
Do not install a leakage protector: The submersible pump works in water, and it is easy to leak electricity and cause power loss or even electric shock accidents. If a leakage protector is installed, the leakage protector will cut off the power supply of the submersible pump as long as the leakage value exceeds the operating current value of the leakage protector (generally not exceeding 30 mA).
4 INCH SUBMERSIBLE ELECTRIC WATER PUMP products When not in use for a long time, it is best not to immerse in water for a long time. They should be placed in clean water and run for a few minutes to clean the mud inside and outside the pump, then lift it out of the water and dry it. Perform a major inspection and disassemble all parts. Carry out maintenance, scrubbing, derusting and descaling, replace vulnerable parts, and then reassemble them. After painting and antirusting, put them in a dry warehouse without corrosive gases.
GUESTBOOK