NEW JET
OUR PRODUCTS
>
>
>
8P SERIES WATER-FILLED SUBMERSIBLE 8 INCH MOTOR

Products

8P SERIES WATER-FILLED SUBMERSIBLE 8 INCH MOTOR

8P SERIES WATER-FILLED SUBMERSIBLE 8 INCH MOTOR
 ${ele.title}
SPECIFICATIONS
Parameters
TECHNICAL DATA
CATALOGUE

 

SPECIFICATIONS

The shaft extension and coupling of the 8P series water-filled 8-inch submersible motor comply with NEMA standards.8P series water-filled 8-inch submersible motors can rewind the stator.The winding insulation grade of the 8P series water-filled 8-inch submersible motor is Y grade.The protection level of the 8P series water-filled 8-inch submersible motor is IP68.8P series water-filled 8-inch submersible motors have standard compensation bellows for internal liquid expansion for normal operation.8P series water-filled 8-inch submersible motors have shafts supported by oversized thrust bearings, which can withstand thrust loads up to 15500 N.The filling fluid of the 8P series water-filled 8-inch submersible motor uses water mixed with non-toxic antifreeze glycol to provide cooling and lubrication, and also protect and prevent internal parts from corrosion.The maximum immersion depth of the 8P series water-filled 8-inch submersible motor is 200 m.The maximum starting times of 8P series water-filled 8-inch submersible motors at fixed intervals is 10 times per hour.The maximum allowable voltage fluctuation above the rated voltage during the operation of the 8P series water-filled 8-inch submersible motor is ±7%.

VERSION

  • Three-phase from 3 to 45 kW, 380 V/50 Hz.

 

 

We could not find any corresponding parameters, please add them to the properties table
NEW JET S.R.L.

Via della Tecnica n.5-42015 Prato di Correggio(RE) ITALY

+39 0522 736526

GUESTBOOK

Username used for comment:
客户留言
Description:
验证码

Copyright © 2021 NEW JET All Right Reserved.