NEW JET
NEWS
>
>
>
3inch submersible motor factory will take you to understand the characteristics of submersible motors

News

3inch submersible motor factory will take you to understand the characteristics of submersible motors

  • Origin:
  • Time of issue:2023-07-13 07:57
  • Views:

(Summary description)3inch submersible motor factory protection level requirements: Because the motor needs to be continuously immersed in water to work, the motor must be made in accordance with IP68. To meet this requirement, in addition to the necessary sealing measures, the precision requirements of machined parts must be high.

3inch submersible motor factory will take you to understand the characteristics of submersible motors

(Summary description)3inch submersible motor factory protection level requirements: Because the motor needs to be continuously immersed in water to work, the motor must be made in accordance with IP68. To meet this requirement, in addition to the necessary sealing measures, the precision requirements of machined parts must be high.

Information

  3inch submersible motor factory protection level requirements: Because the motor needs to be continuously immersed in water to work, the motor must be made in accordance with IP68. To meet this requirement, in addition to the necessary sealing measures, the precision requirements of machined parts must be high.

3inch submersible motor

  Corrosion resistance: The 3inch submersible motor factory feels that due to the particularity of the operating environment of the motor, the casing and end cover of the motor should be made of corrosion-resistant materials and coated with anti-corrosion asphalt paint.

  Sealing requirements: The static seal part is sealed by oil-resistant rubber O-rings or coated with sealant, and the dynamic seal is composed of single-end or double-end mechanical seals and sand throwing rings.

  3inch submersible motor factory electrical insulation requirements: the submersible motor should adopt H-class insulation, and ensure the dipping and drying effect of the winding through a special dipping process; in order to achieve this purpose, VPI equipment is the first choice, and is controlled by the viscosity of dipping and drying. Control, if necessary, increase the number of dipping paints, preferably using a rotary oven to ensure uniform curing of dipping paints.

  Internal protection requirements of 3inch submersible motor factory: winding and bearing temperature measurement and control components must be installed inside the motor; motor insulation resistance monitoring components; water ingress alarm sensors in the inner cavity, isolation room, and junction box; and various alarm sensors must be ensured The transmitted signal can be commanded and controlled normally.

  3inch submersible motor factory safety operation protection: 1) Overvoltage instantaneous action protection and overcurrent delayed action protection; 2) Motor winding high temperature delay protection, motor water ingress protection.

Keyword:

NEW JET S.R.L.

Via della Tecnica n.5-42015 Prato di Correggio(RE) ITALY

+39 0522 736526

GUESTBOOK

Username used for comment:
客户留言
Description:
验证码

Copyright © 2021 NEW JET All Right Reserved.

 

辽ICP备18014221号-4